سانچہ:Infobox firearm cartridge

.357 SIG
.357 SIG
	Comparison to other cartridges. .357 SIG third from left.
قسم	Pistol
آغاز کا مقام	ریاستہائے متحدہ امریکا
تاریخِ پیداوار
موجد	SIGARMS/Federal Cartridge Co.
تاریخ ایجاد	1994
تفصیلات
کیس کی قسم	Rimless, bottleneck
گولی کا قطر	.355 انچ (9.0 ملی میٹر)
قطر لینڈ	.343 انچ (8.7 ملی میٹر)
قطر گردن	.381 انچ (9.7 ملی میٹر)
قطر شانہ	.424 انچ (10.8 ملی میٹر)
بنیاد کا قطر	.424 انچ (10.8 ملی میٹر)
رِم کا قطر	.424 انچ (10.8 ملی میٹر)
رم کی موٹائی	.055 انچ (1.4 ملی میٹر)
کیس کی لمبائی	.865 انچ (22.0 ملی میٹر)
کل لمبائی	1.14 انچ (29 ملی میٹر)
پرائمر کی قسم	Small pistol
بیلسٹک کارکردگی
	Test barrel length: 4 in; Source(s): Steve's 357 SIG Ballistic Page

{{{name}}}
{{{name}}}
	[[File:{{{image}}}\|{{{image_size}}}\|alt={{{alt}}}\|{{{alt}}}]] {{{caption}}}
قسم	{{{type}}}
آغاز کا مقام	{{{origin}}}
تاریخِ استعمال
زیر استعمال	{{{service}}}
صارفین	{{{used_by}}}
جنگیں	{{{wars}}}
تاریخِ پیداوار
موجد	{{{designer}}}
تاریخ ایجاد	{{{design_date}}}
کارخانہ دار	{{{manufacturer}}}
تاریخ پیداوار	{{{production_date}}}
کل تیار کردہ	{{{number}}}
انواع	{{{variants}}}
تفصیلات
کارتوس مادر	{{{parent}}}
کیس کی قسم	{{{case_type}}}
گولی کا قطر	{{{bullet}}}
قطر لینڈ	{{{land}}}
قطر گردن	{{{neck}}}
قطر شانہ	{{{shoulder}}}
بنیاد کا قطر	{{{base}}}
رِم کا قطر	{{{rim_dia}}}
رم کی موٹائی	{{{rim_thick}}}
کیس کی لمبائی	{{{case_length}}}
کل لمبائی	{{{length}}}
کیس کی گنجائش	{{{case_capacity}}}
تفنگی موڑ	{{{rifling}}}
پرائمر کی قسم	{{{primer}}}
بیشترین دباؤ ({{{pressure_method}}})	{{{max_pressure}}}
بیشترین دباؤ ({{{pressure_method2}}})	{{{max_pressure2}}}
بیشترین دباؤ ({{{pressure_method3}}})	{{{max_pressure3}}}
Maximum CUP	{{{max_cup}}} CUP{{{max_cup_ref}}}
مسالہ	{{{filling}}}
مسالے کا وزن	{{{filling_weight}}}
نظام; دھماکہ	{{{detonation}}}
دھماکے کی پیداوار	{{{yield}}}
بیلسٹک کارکردگی
	Test barrel length: {{{test_barrel_length}}}; Source(s): {{{balsrc}}}

دستاویز [نمائش] [ترمیم] [تاریخچہ] [تطہیر]

اس سانچے میں حسب ذیل لوا ماڈیول زیر استعمال ہے:

Usage

Firearm cartridge infobox

A firearm cartridge infobox may be used to summarize information about a particular cartridge or artillery shell. The infobox should be added using the {{Infobox firearm cartridge}} template, as shown below:

{{Infobox firearm cartridge
| name = 
| image = 
| alt = 
| caption = 
| type = 
| origin = 
<!-- Service history -->
| service = 
| used_by = 
| wars = 
<!-- Production history -->
| designer = 
| design_date = 
| manufacturer = 
| production_date = 
| number = 
| variants = 
<!-- Specifications -->
| is_SI_specs = 
| parent = 
| case_type = 
| bullet = 
| bullet_ref = 
| land = 
| land_ref = 
| neck = 
| neck_ref = 
| shoulder = 
| shoulder_ref = 
| base = 
| base_ref = 
| rim_dia = 
| rim_dia_ref = 
| rim_thick = 
| rim_thick_ref = 
| case_length = 
| case_length_ref = 
| length = 
| length_ref = 
| case_capacity = 
| case_capacity_ref = 
| rifling = 
| primer = 
| max_pressure = 
| max_pressure_ref = 
| pressure_method = 
| max_pressure2 = 
| max_pressure2_ref = 
| pressure_method2 = 
| max_pressure3 = 
| max_pressure3_ref = 
| pressure_method3 = 
| max_cup = 
| max_cup_ref = 
| filling = 
| filling_weight = 
| detonation = 
| yield = 
<!-- Ballistic performance -->
| is_SI_ballistics = 
| bwunit = 
| bw1 = 
| btype1 = 
| vel1 = 
| en1 = 
| bw2 = 
| btype2 = 
| vel2 = 
| en2 = 
| bw3 = 
| btype3 = 
| vel3 = 
| en3 = 
| bw4 = 
| btype4 = 
| vel4 = 
| en4 = 
| bw5 = 
| btype5 = 
| vel5 = 
| en5 = 
| test_barrel_length = 
| balsrc = 
}}

Parameters

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE). References for numerically converted parameters (e.g., |bullet=) can be appended using the corresponding ref parameter (e.g., |bullet_ref=). Sources for the ballistic performance table, and more general sources, can be included using the |balsrc= parameter.

General parameters:

name – the formal name of the cartridge.
image – optional – an image of the cartridge, should be given in the form Example.jpg.
image_size – optional – width of image, should be given in the form 300px.
alt – optional – alternative text describing the image for visually impaired users, see WP:ALT.
caption – optional – the text to be placed below the image.
type – the type of cartridge or its designed use (e.g. "پستول", "بندوق", "Hunting", etc.).
origin – the country or place where the cartridgeoriginated or was first manufactured.

Service history parameters:

service – optional – the period (usually given in years) when the cartridge was in service.
used_by – optional – the countries, armed forces, or other groups using the cartridge; this may be omitted for cartridges employed only in their country of origin.
wars – optional – any wars during which the cartridge saw service.

Production history parameters:

designer – optional – the person or group responsible for designing the cartridge.
design_date – optional – the date (usually given as a year) when the cartridge was designed.
manufacturer – optional – the manufacturer of the cartridge.
production_date – optional – the period (usually given in years) when the cartridge was produced.
number – optional – the number of cartridge of this type that were manufactured.
variants – optional – any variant models of the cartridge.

Specification parameters:

is_SI_specs – optional – "yes" if the specifications are entered in بین الاقوامی نظام اکائیات; any other value causes it to be interpreted as English units.
parent – optional – the cartridge that the cartridge was based on, if any.
case_type – optional – the type of case used for the cartridge (e.g. rimmed, rimless, straight, bottlenecked, etc.).
bullet – optional – the diameter of the bullet used in the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
land – optional – the land diameter of the rifling in the barrel, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
neck – optional – the neck diameter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
shoulder – optional – the shoulder diameter of the cartridge, if any, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
base – optional – the base diameter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
rim_dia – optional – the rim diamter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
rim_thick – optional – the rim thickness of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
case_length – optional – the case length of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
length – optional – the overall length of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
case_capacity – optional – the volume of the casing, expressed in cm³ or grains of water; only include the number, and not the units of measurement, and omit any commas.
rifling – optional – typical rifling to stabilize the bullet fired from the cartridge.
primer – optional – the type of primer used in the cartridge (e.g. large pistol, small rifle, rimfire, etc.).
max_pressure – optional – the maximum chamber pressure of the round, expressed in MPa or psi; only include the number, and not the units of measurement, and omit any commas.
pressure_method – optional – the methodology used to measure pressure, such as SAAMI, CIP, EPVAT, SCATP.
max_pressure2 – optional as above, second pressure with method
pressure_method2 – optional as above, second pressure's method
max_pressure3 – optional as above, third pressure with method
pressure_method2 – optional as above, third pressure's method
max_cup – optional – the maximum chamber pressure of the round, expressed in CUP; only include the number, and not the units of measurement, and omit any commas. Note that this parameter is not affected by the is_SI_specs parameter.
filling – optional – the explosive filling material of the shell, if any.
filling_weight – optional – the weight of the explosive material of the shell, if any.
detonation – optional – for explosive shells, the detonation trigger type (e.g. "timer", "pressure", "motion sensor").
yield – optional – for explosive shells, the yield (in tons of TNT) of the device.

Ballistic performance parameters:

Ballistic data for up to five different weight bullets can be specified; it may be provided in either SI or English units, but this choice must be consistent for all five sets. The x in the field name should be replaced with 1–5 as displayed in the template format shown above (e.g. bw1, bw2, btype1, btype2, vel1, vel2, en1, en2, etc.):

is_SI_ballistics – optional – "yes" if the energy and velocity ballistics data is entered in بین الاقوامی نظام اکائیات; any other value causes it to be interpreted as English units.
bwunit – optional – "gram" if the weights are given in grams; any other value causes them to be interpreted as grains.
bwround – optional – specify the number of digits after the decimal point in the converted weight (the default is 0 if not specified; if specified but empty, defaults to the same default as convert).
bwx – optional – the weight of the bullet for given data, expressed in grams or grains; only include the number, and not the units of measurement.
- btypex – optional – the type of bullet (e.g. JHP, FMJ, BHP, etc.).
- velx – required if bw field is specified – velocity of the bullet at the muzzle, expressed in m/s or ft/s; only include the number, and not the units of measurement, and omit any commas.
- enx – required if bw field is specified – energy of the bullet at the muzzle, expressed in J or ft·lbf; only include the number, and not the units of measurement, and omit any commas.
test_barrel_length – optional – the length of the barrel used when generating the ballistics data.
balsrc – optional – the source from which the ballistics data was obtained.

Example

{{Infobox firearm cartridge
| name = .357 SIG
| image = 9mm 7,62mm 357sig 10mm 45SW 45GAP 50AE 002.jpg
| image_size = 300px
| caption = Comparison to other cartridges.  .357 SIG third from left.
| type = Pistol
| origin = [[ریاستہائے متحدہ امریکا]]
| designer = [[SIGARMS]]/[[Federal Cartridge Company|Federal Cartridge Co.]]
| design_date = 1994
| parent = 
| case_type = Rimless, bottleneck
| bullet = .355
| land = .343
| neck = .381
| shoulder = .424
| base = .424
| rim_dia = .424
| rim_thick = .055
| case_length = .865
| length = 1.14
| rifling = 
| primer = Small pistol
| bw1 = 115
| btype1 = [[Hollow point bullet|BHP]]
| vel1 = 1564
| en1 = 624
| bw2 = 124
| btype2 = [[Hollow point bullet|JHP]]
| vel2 = 1329
| en2 = 486
| bw3 = 125
| btype3 = JHP
| vel3 = 1299
| en3 = 468
| bw4 = 147
| btype4 = JHP
| vel4 = 1186
| en4 = 459
| bw5 = 150
| btype5 = JHP
| vel5 = 1130
| en5 = 425
| test_barrel_length = 4 in
| balsrc = [http://stevespages.com/page8f357sig.html Steve's 357 SIG Ballistic Page]
}}

Microformat

سانچہ:UF-hprod

اوپر دی گئی دستاویز صفحہ سانچہ:Infobox firearm cartridge/دستاویز سے شامل کی گئی ہے۔ (ترمیم | تاریخچہ)
صارفین سانچہ کے تختہ مشق (تخلیق | آئینہ) اور ثابتات (تخلیق) میں تجربات کرسکتے ہیں۔
براہ کرم /دستاویز کے ذیلی صفحہ پر زمرہ جات شامل فرمائیں۔ اس سانچہ کے ذیلی صفحات۔